PRODUCT SPOTLIGHT: SELECTLOK'S RANGE OF GAS STRUTS AND ACCESSORIES

PRODUCT SPOTLIGHT: SELECTLOK'S RANGE OF GAS STRUTS AND ACCESSORIES

Unlock Controlled Movement and Reliable Support for Lids, Doors and Hatches

In builds such as service van canopies, trailers, toolboxes, marine hatches, RV compartments and industrial enclosures, hardware often falls short when it comes to supporting movement:

  • Doors or lids that feel heavy, swing uncontrolled or slam shut unexpectedly.

  • Hinges and supports that lack damping, causing rattling or misalignment under vibration.

  • Poorly matched gas struts, leading to early failure or inadequate lift.

  • Inadequate specification — missing force rating, incorrect mount length or unsuitable end connectors.

Professionals need a solution that gives controlled lift, dependable retention, specification clarity and durability in harsh conditions.

The Solution: Selectlok Gas Struts and Accessories

Selectlok’s range of gas struts and accessories addresses these demands head‑on. Whether you’re specifying for light‑duty hatches or heavy‑load lids, the system is built for versatility — with multiple lengths, pressure ratings, end‑fittings and supporting hardware. 

Key Features and Benefits

  • Measurement clarity: Struts are measured from centre‑of‑eye to centre‑of‑eye at full extension.

  • Wide duty range: From light/medium duty to heavy‑duty options (e.g., extended lengths 830 mm, pressure up to 1,500 N) for demanding lids and doors.

  • Quality construction: Premium shaft and cylinder materials, QPQ or corrosion‑resistant finishes in many models.

  • Accessories & mounting hardware: Quick‑fit ends, ball studs, brackets offered to tailor each installation.

  • Specification support tools: Force‑calculation formula and selection guidance offered to ensure correct sizing and fit. 

Pro Tip: For mobile builds under vibration, select a strut with a larger shaft diameter and higher Newton force (N) rating to ensure precision and longevity.

Technical Snapshot

  Specification

  Typical Value or Range

 Extended length examples

 220 mm to 830 mm and beyond 

 Pressure/force range

 Approx. 100 N to 1,500 N depending on model 

 Pressure/force range

 Approx. 100 N to 1,500 N depending on model 

 Measurement method

 Centre‑of‑eye to centre‑of‑eye (extended) 

 Standard ends/connectors

 Quick‑fit ends (Plastic or Steel ball studs) 

Application environments

Caravans, RVs, trailers, hatches, industrial lids 

 

Why This Range Outperforms Generic Struts

  • Many generic struts are underspecified or lack clear force ratings and supportive accessories. Selectlok’s range provides full specification, mounting support and application guidance.

  • For mobile or transport environments (trailers, RVs, canopies) the combination of correct sizing, quality finish and accessory support means fewer failures, less rattling and more professional outcomes.

  • With a broad range of lengths and forces, technicians can match the strut to the door, rather than compromise with an off‑the‑shelf one‑size solution.

Ideal Applications

  • Up‑lift canopy lids on service vehicles that must stay open and resist vibration while driving.

  • Toolboxes or drawer‑modules in trailers where smooth, controlled motion and full access are needed.

  • Marine or outdoor compartments with lids that must withstand salt spray, weather and dynamic movement.

  • Industrial enclosures where heavy panels require mechanical assistance and professional hardware to meet specification.

If your application demands lid/door support, smooth motion, precise hold‑open behaviour and specification reliability, the Selectlok Gas Struts & Accessories range delivers. With correct sizing, premium construction and broad mounting support, you’re equipping your project with hardware built for performance, durability and professional outcomes.

Want help selecting the right strut or accessory for your next build? Contact your Selectlok rep for advice, CAD drawings and project‑support.

 

 

Back to blog